Twist Engineering Works got huge response from Plastic Exhibition”PLASTIVISION INDIA-2011” at NSE Complex, Goregaon (East), Mumbai. Click here to get more information about that.
>>Sheet Making Plant From LDPE/HDPE/PP/HIPS/ABS & Nylon
Models
TS-65
TS-75
TS-90
TS-100
TS-125
Screw Diameter
65 mm
75 mm
90 mm
100 mm
125 mm
Screw L/D Ratio
30:1
30:1
28:1
28:1
28:1
Extruder Motor KW
15.0 KW
22.4 KW
37.3 KW
56.0 KW
75.0 kW
«Sheet width min. - Max
500-800
500-900
700-1200
800-1500
1000-2000
Polishing stack motor KW
2.0 KW
3.73 KW
5.00 kW
7.5 KW
10.0 kW
Out put Kg/Hr
80-90
90-100
130-140
190-210
250-280
*Total connected load
45.0 KW
56.0 kW
82.0 kW
103.0 KW
141.0 KW
«Sheet width mentioned above is in general. Plants for the sheet width and thickness as per customer’s requirement will be supplied.
*Heating load of coat hanger die is depending on the width of die. It is subject to change with your requirement of sheet width.
Specifications for the extruder will be same as other extruders. Screw & Barrel made from alloy nitride steel (EN-41B) and processed for gas/plasma nitride. Energy efficient helical reduction gear box will be coupled with variable speed electric motor to rotate the screw.
Temperature and all electrical controls will be through sophisticated temperature and control panel.
Coat hanger (TEE) die will be made with very accuracy to distribute the melt flow across the lip. Polishing stack rollers will be dual jacketed. Highly mirror finished, hardened and hard chrome plated with rotary joints for cooling /heating the roller surface according to product need. Hot /cold oil/water circulation and temperature control system will be there.
Winder / on line cutter according to product need will be supplied.
