• Vessels are dual jacketed. Inner vessel fabricated from 5 mm thick stainless steel sheet. Outer jacket fabricated from heavy steel sheet with Water inlet and outlets provided.
  • Aluminum cast / fabricated lid and discharge valve will be pneumatic operated.
  • Blades made from stainless steel and treated for hard face coating on the mixing edges for long lasting. Stainless steel baffles plate with facility to change the angle, for different compounds. Thermocouple provided in the bottom of baffles so that it remains in contact of material under mixing.
  • It will show the real temperature of mixing batch.
  • Teflon ring provided in the bottom of vessel, Oil seal housing with oil seal below the vessel providing for perfect sealing and avoid material leakage into bearings.
  • Additional gland (rope type) sealing also provided in addition to above seals for special application mixers for pigments and MASTERBATCH MAKING PURPOSE.
  • Specially designed heavy duty C.I.“ Bearing and vessel housing” gives equilibrium during mixing.
  • Specially designed cone type pulley will be provided on mixer vessel shaft to minimize cantilever loading on the shaft.
  • Control Panel having mixer motor control, Ampere meter, Temperature controller, hooter/ indicator and main switch.
  • Option for Mixer with single speed motor and AC Variable speed drive is beneficial for electrical installation and equipments. It controls/ regulates starting heavy inrush current (6-7 times of full load current) of the motor. Resulting into increase in motor winding, bearings & vee belts life and reduce maintenance & electrical consumption.
MODELS HCM-Lab HCM-1340 HCM-2150 HCM- 2550 HCM- 3060 HCM- 4275 HCM- 4580 HCM- 50150
Batch capacity 05 Kg 40 Kg 60 Kg 80 Kg 100 Kg 120 Kg 150 Kg 200 Kg
Mixer Motor – Dual Speed or Single Speed HP# 4/5 Dual
speed or 3 HP
20/40 Dual
speed or 20 HP
31/40 Dual
speed or 40 HP
43/51 Dual
speed or 50 HP
50/60 Dual
speed or 60 HP
75 .0 HP 90 .0 HP 134 .0 HP
Cooler Mixer Motor 1.0 HP 5.0 HP 5.0 HP 7.5 HP 7.5 HP 10.0 HP 10.0 HP 15.0 HP
Mixing tool RPM Dual speed /Single Speed 500/1000
or 750
500/1000
or 750
500/1000
or 750
430/860
or 750
430/860
or 750
100 to 750
variable
100 to 750
variable
100 to 750
variable
Mixer motor control
Dual speed/ Star Delta/AC Vari drive
Dual Speed/  Star Delta/  AC Vari Drive Dual Speed/  Star Delta/  AC Vari Drive Dual Speed/  Star Delta/  AC Vari Drive Dual Speed/  Star Delta/  AC Vari Drive Dual Speed/  Star Delta/  AC Vari Drive Variable Speed Drive Variable Speed Drive Variable Speed Drive
Cooling Water Requirement 70
Lts. / Hr.
300
Lts. / Hr.
400
Lts. / Hr.
550
Lts. / Hr.
600
Lts. / Hr.
700
Lts. / Hr.
800
Lts. / Hr.
1200
Lts. / Hr.
Total Electrical Load 3.75 KW 22 .0 KW 34. 0 KW 44.0 KW 51.0  KW 63.5 KW 74.5 KW 112.0 KW
Floor Space Requirement 1.0 X 0.8 Mt 3.5 X 4.0 Mt 3.7 X 4.2 Mt 4.0 X 4.2 Mt 4.2 X 4.5 Mt 4.5 X 5.0 Mt 4.5 X 5.0 Mt 5.0 X 6.0  Mt
# Mixer Motor Capacity may change according to application. It will be as per our quotation.

 

NOTE: Motor capacities mentioned in above table are for making RPVC/ UPVC compound. Motor capacity will be higher than mentioned for making plasticized/ soft PVC compounds. Mixers for special applications are also available.