|
| >>Blown Film Plants And Compact Film Plants |
|
|
|
5. DOUBLE BUBBLE BLOWN FILM PLANT
--------------------------------------------------------------------------------------------------------------------------------------
6. PP-TQ BLOWN FILM PLANT
| MODELS |
TPQ - 38 |
TPQ - 50 |
TPQ - 65 |
| Screw Diameter mm |
38 |
50 |
65 |
| Screw L/D Ratio |
26:1/28:1 |
28:1 |
28:1 |
| Extruder Motor KW |
5.0 |
9.3 |
15.0 |
| Output Kg. / Hr. |
25-28 |
40-45 |
60-70 |
| Lay Flat Width mm |
50-250 |
75-600 |
150-900 |
| Brass Sizers |
02 Nos. |
02 Nos. |
02 Nos. |
| Total Connected Load |
12.5 KW |
23.5 KW |
36.25 KW |
Spiral Die head with Rotating die, Maintenance Free slip-ring & brush less Also available.
|
TAKE OFF UNIT : Having one set of rollers (Rubber and S.S. Coated steel roller) driven by AC motor coupled with reduction gear box. Stainless steel / Aluminum water bath provided. Stainless steel down ward lay flat flatting boards with adjustment devices. Ledder will be provided to climb on take off unit plat farm.
SIZING RING & WATER BATH : Aluminum / Brass sizing rings with jacketed water bath having cold / chilled water inlet and out lets with control valves. Water bath height adjustment facility provided. For clarit and shinging of PP Film chiled water is requied water chilling plant is not in our scop of supply.
DRIER : Having heater and blower with motor for drying the wet film.
WINDER : Choice from Surface, Cantilever or centre type winders. Winders having coontroller with torque motor coupled with reduction gear box. Cantilever and centre type winders having set of Nip rollers with AC frequency drive & AC motor coupled with redution gear box.
--------------------------------------------------------------------------------------------------------------------------------------
|
